 |
 |
ITOH
DENKI Europe SAS
490 avenue des Jourdies
zae des Jourdies BP323
74807 Saint Pierre en Faucigny
Tel: + 33 (0)4 50 03 09 99
Fax: + 33( 0)4 50 03 07 60
info@itoh-denki.com
www.itoh-denki.com |
|
|
|
 |
 |
 |
|
| DC Brushless motorized rollers for roller conveyors |
|
Application:
• Decentralized transportation of loads (cardboard boxes, trays, totes…)
• High speed / High duty cycle
• Zone management (accumulation without pressure…)
• Conveyor picking systems & assembly lines in need of traceability and flow management
Benefits:
• Security/Comfort/Ecological (without oil bath)
• Single energy source (all 24V DC)
- motors, automation, sensors
• Modular & flexible conveyor zones
• Quick & simple wiring
Concept and characteristics:
• The brushless 24V DC motor 1 and the life lubricated planetary gears and bearings 2 are integrated inside the roller tube 3.
• A circuit board drives the motor offering different control options (see “circuit board” section)
• Suitable for a host of environments: industrial, humid, dusty, wet, oily and clean rooms (IP54, 55 & 65)
• Continuous or intermittent duty cycles (1800 start-stop/hour)
• Speed range from 4 to 65 m/min
• Speed variation: see “circuit board” section
• Available with dynamic break and mechanical brake
Installation principals:
• The motorized roller 1 is linked to a circuit board 2 (see “circuit board” section)
• The idle rollers 3 can be driven by the motorized roller using slave bands, chains or sprockets
• The number of motorized rollers and idle/slave rollers depends on the nature and the weight of the load, the speed and the type of transmission (Please contact us to determine the number of rollers required)
• The motorized roller shafts are locked in the frame using special brackets (see “accessories” section)
DC brushless range:
• Ø 32 standard : series 32HS
• Ø 50 standard: series 50E
• Ø 50 with brake: series 50EB
• Ø 50 with integral circuitry: series 50XE / 50XP
• Ø 57 standard: series 57E
• Ø 57 with integral circuitry: series 57XE / 57XP
• Ø 60.5 standard: series 60E
• Ø 60.5 with integral circuitry: series 60XE / 60XP
Documents to download
DC Catalogue [04/05/2009 10:08] 3192 Ko.
32HS [07/04/2009 14:18] 207 Ko.
50E code 15 with CB016P-7 [11/05/2010 09:06] 353 Ko.
50E code 55 with CB016P-7 [11/05/2010 09:06] 353 Ko.
50EB code 15 with CB016BP-7 [11/05/2010 09:19] 353 Ko.
50EB code 55 with CB016BP-7 [11/05/2010 09:20] 353 Ko.
50XE code 17 [07/07/2009 09:49] 454 Ko.
50XE code 60 [07/07/2009 09:49] 454 Ko.
50XP code 17 [07/07/2009 09:51] 455 Ko.
50XP code 60 [07/07/2009 09:51] 454 Ko.
57E code 15 with CB016P-7 [11/05/2010 09:06] 344 Ko.
57E code 55 with CB016P-7 [11/05/2010 09:08] 344 Ko.
57XE code 17 [07/07/2009 09:52] 437 Ko.
57XE code 60 [07/07/2009 09:52] 438 Ko.
57XP code 17 [07/07/2009 09:52] 437 Ko.
57XP code 60 [07/07/2009 09:53] 438 Ko.
60E code 15 with CB016P-7 [11/05/2010 09:09] 334 Ko.
60E code 55 with CB016P-7 [11/05/2010 09:09] 334 Ko.
60XE code 17 [07/07/2009 09:53] 458 Ko.
60XE code 60 [07/07/2009 09:56] 457 Ko.
60XP code 17 [07/07/2009 09:56] 458 Ko.
60XP code 60 [07/07/2009 09:57] 458 Ko.
|
|
|
 |
 |
 |
|
|